SquareComp Wiki - User contributions [en-gb]

EX-i V180

2024-09-09T18:00:07Z

Lopalos:

Xerox Versant 180 EX-i Embedded Fiery.

I call these Bustle Rip's.

Let's start off. It's a Computer at the end of the day.
[[File:PXL 20240904 211410133.MP.jpg|thumb|EX-i V180 Bustled Fiery]]
EX-i V80 Embedded Fiery

This is the most annoying thing about the printer.

When it's Happy, You're Happy.

When it's Sad, You're Sad

Error Codes

* FF = Fully Fucked
* 00 = OK

That's the two you will see most often.

More Error Codes can be found. [[EX-i V180 ErrorCodes]]

FF can mean many things, but, we can go through what I've done and how I've resolved my Many issues.

First Boot, FF... Nothing happening, OS Frozen. Reboot.

Boot, FF, Reboot, FF, Reboot, FF, Reboot, FF......... I'm guessing corrupted OS. Reflash!

Boot, FF, Reboot, FF, Reboot, FF, 00. Happy Machine!

OK, Maybe Not.... I've just had it FF, 00, FF and Power Down.

So, if you experience Boot, FF, Reboot, FF, Reboot, FF, 00, FF Power Off... Take the Side of the Case off. The '''CPU Fan''' isn't running.

This means, you will have to reseat the Heatsink. It's destroyed what Thermal Compound you had. Once you clean, apply thermal paste, put everything back together (Try switching the SYS_FAN and CPU_FAN (What I did)) Power back on and boom.

So I did end up replacing the Hard Drive in this, it was from 2017 so, not a bad thing, but turns out, the CPU fan just wasn't running at all.
[[File:PXL 20240904 214550420.MP.jpg|thumb|Embedded Motherboard]]
[[File:CPU and SYS Fan Headers.jpg|thumb|494x494px|CPU and SYS Fan Headers]]

File:CPU and SYS Fan Headers.jpg

2024-09-09T17:59:16Z

Lopalos:

CPU and SYS Fan Headers

EX-i V180

2024-09-09T17:55:49Z

Lopalos:

File:Logo.png

2024-09-07T12:02:35Z

Lopalos:

File:Favicon-32x32.png

2024-09-07T11:57:23Z

Lopalos:

File:Logo1024.jpg

2024-09-07T11:54:34Z

Lopalos: Logo

== Summary ==
Logo

File:SquareComp small trans.png

2024-09-07T11:48:39Z

Lopalos: Logo

== Summary ==
Logo

User:Lopalos

2024-09-07T11:44:17Z

Lopalos: Created page with "I have a blog at https://l0p.uk that I post my random thoughts too. Founder of SquareComp in 2008. Only just getting around to starting my business.... Yeah, it's been a few years. Mentally Unstable."

I have a blog at https://l0p.uk that I post my random thoughts too.

Founder of SquareComp in 2008.

Only just getting around to starting my business.... Yeah, it's been a few years.

Mentally Unstable.

File:PXL 20240904 214550420.MP.jpg

2024-09-06T15:17:32Z

Lopalos:

Motherboard with nothing connected.

EX-i V180

2024-09-05T14:07:15Z

Lopalos: I finally fixed it and that was the issue.

EX-i V180

2024-09-04T22:20:58Z

Lopalos:

EX-i V180 ErrorCodes

2024-09-04T22:20:19Z

Lopalos: Error Codes

{| class="wikitable"
|+
!LED Error Code
!Operation Type
!Description
!Suggested Action
|-
|11
|
|Failed to retrieve product information
|Your USB is corrupted. Try recreating the USB again.
|-
|02
|
|Unsupported Fiery server
|Product information is found, but Fiery Clone Tool does not support this product
|-
|05
|Backup
|Insufficient USB Flash Disk Space
|Make sure the USB Flash Drive has enough space for the cloned image when you back up the Fiery Server (Recommended is 16GB Minimum)
|-
|08
|Backup
|File operation error. I/O error when writing to the USB.
|
# Run Windows Disk Error Check on the USB flash drive.
# Prepare the USB flash drive again using the USB Prep tool.
|-
|09
|
|Missing hard disk drive
|Check the Fiery server to verify hard disk drive installation
(The SATA Port for the Hard Drive is located on the underside of the case, looks like it recommends one port!)
|-
|0F
|Backup
|Failed to write to USB flash drive, or error reading from hard drive.
|
# Run Windows Disk Error Check on the USB drive.
# Re-prepare the USB drive using the USB Prep tool.
# Check the hard disk drive if the USB flash drive is working properly, then try again.
|-
|10
|
|Failed to read service switch position
|Check if the service switch cable is connected properly to the motherboard.
|-
|20
|Backup
|Encountered an unsupported file system on the Fiery server.
|The Fiery server is not properly installed. Reinstall the Fiery server.
'''NOTE''': If Fiery Clone Tool cannot read the hard disk drive partition, then the backup procedure cannot be performed.
|-
|21
|Backup and Restore
|Failed to mount hard disk drive partition
|The Fiery server is not properly installed. Reinstall the Fiery server.
'''NOTE''': If Fiery Clone Tool cannot mount the hard disk drive partition, then the backup procedure cannot be performed.
|-
|30
|Backup
|Some Fiery files are missing (corrupt installation.)
|The Fiery server might not be running properly. Reinstall the Fiery server.
|-
|40
|Restore
|No valid image(s) to restore
|Check the USB flash drive to verify that you have the correct cloned image file for the Fiery server.
|-
|41
|Restore
|Cloned image file is for the correct product, but feature set does not match.
|Check the USB flash drive to verify that you have the correct cloned image file that match the same feature set for the Fiery server.
|-
|42
|Restore
|Clones image file is for the correct product, but the hard disk drive is too small.
|Make sure to install the hard disk drive that has the default factory size for storage (meets the minimum hard disk drive space requirement for Firey Clone Tool), or greater.
(Minimum 500GB)
|-
|43
|Restore
|Failed to format hard disk drive
|Replace the hard disk drive.
|-
|44
|Retore
|The USB flash drive may have corrupted cloned image file, or your hard disk drive cannot be accessed.
|
# Run Windows Disk Error Check on the USB drive.
# Re-prepare the USB drive using the USB Prep tool.
# Use another computer with an external connection to format the hard disk drive, if Fiery Clone Tool cannot write to the hard disk drive.
# If the above actions do not work, replace the hard disk drive.
|-
|45
|
|Failed to install bootloader
|
# Use another computer with an external connection to format the hard disk drive, if Fiery Clone Tool cannot write to the hard disk drive.
# If the above actions do not work, replace the hard disk drive.
|}

EX-i V180

2024-09-04T22:00:06Z

Lopalos:

EX-i V180

2024-09-04T21:56:27Z

Lopalos: First Version.

File:PXL 20240904 211410133.MP.jpg

2024-09-04T21:56:03Z

Lopalos:

EX-i V180 Bustled Fiery

File:EX-i V80.jpg.jpg

2024-09-04T21:15:40Z

Lopalos:

EX-i V80 FIery